Support Surfaces

Therapy Systems provides the finest in Support Surfaces for Maryland, Northern Virginia, Delaware and Washington, D.C.

Invacare

Invacare MA55 (36") Dual Function APM/LAL

  • • Provides pressure relief in the prevention and treatment of pressure ulcers.
  • • 350 pound weight capacity
  • • Size: 36″ x 80″
  • • Alternating pressure mattress has 16 horizontally configured 8″ bladders.
  • • Mattress will not bottom out with mattress hose attached to the compressor power unit.
  • • Provides a temperate climate for patients with its ability to circulate air within the mattress.

Moxi SelectAir (36") LAL

  • • Quiet, portable, lightweight and very reliable, the SelectAir Mattress and control unit provide a cost-effective to other pressure management systems.
  • • Firm Mattress Mode: Helps facilitate nursing care during dressing changes and patient repositioning.
  • • Upright Patient Mode: Adds support when the head of the bed is elevated
  • • Foot Pillow: Helps to prevent unnecessary skin breakdown due to patient migration.
  • • 400 pound weight capacity
  • • Size: 36″ x 80″

SenTech Stage IV Millennium 3

  • • Stage 1 – 4 pressure sores
  • • Easy touch pad operation
  • • Panel lockout secures panel from setting changes
  • • Internal sensors detect and adjust changes in pressure
  • • Internal memory automatically stores all settings
  • • Firm mode assists in patient transfers and dressing changes
  • • Remains inflated in the event of power failure
  • • Multiple zones
  • • Size: 36″ x 80″
STAGE-IV-MILLENNIUM-3-B

STAGE IV MILLENIUM 3 for VersaCare®

All the features of Stage IV, with modified base for use with Hill-Rom VersaCare hospital beds

Sentech Primary Care APM

  • • Primary care low air loss and alternating pressure mattress system, customizable for individual patient needs just by setting patient weight.
  • • Alternating pressure relief provides complete deflation of every other air cell on a 5 minute cycle.
  • • Low-air-loss system features a series of low-air-loss vent hoses, and allows for adjustable rate of airflow.
  • • Energy efficient – equivalent to less than that of a 25-watt bulb.
  • • 300 pound weight capacity
  • • Size: 36″ x 80″

K-4oem AIRE-FLOAT Mattress

  • • Plug and play auto-sensing multi-use control unit
  • • User-friendly control panel w/ LED display for simple user interface
  • • Displays current mode, A/P times, and patient comfort pressure from Soft 0 to Firm 9
  • • State of the art micro-controller w/ Real Time Pressure Monitoring (RTPM) sensor
  • • Static or alternating pressure therapies w/continuous true low air loss relief
  • • Upright mode inflates to 80% higher pressure to eliminate patient bottoming
  • • Audiovisual alarms in the event of power outage or low pressures (hose disconnect)
  • • Control unit is reliable, quiet, compact and lightweight

Thera Turn Bariatric APM

  • • Easy interactive setup screen
  • • Internal operating instructions
  • • Choice of hold positions center, left or right
  • • Choice of angle-of-hold
  • • Automatic filter display
  • • Comfort level setting
  • • 4 pre-programmed turning angles
  • • 750 pound weight capacity

Posey Bolster Covers

  • • Quick-release buckles easily secure the cover to the bed
  • • Easy to clean denier nylon with urethane coating
  • • Zippered foam compartments
  • • Available in Standard and Bariatric sizes

Prius Rhthym Mutli 42" & 48" Mattress

  • • 8″ air cell mattress replacement
  • • 3-1 alteration and static
  • • Low air loss therapy
  • • Pulsation therapy
  • • Happy Heel – dial softness control at foot section
  • • Auto Firm provides immediate firm surface
  • • High vapor permeable and quilted nylon cover
  • • 2″ convoluted foam base
  • • Integrated glide sheet to base cover for easy transferring
  • • Visual and audio alarm for low pressure and power failure with alarm mute function
  • • Keypad lock out function
  • • Modularized design for air mattress
  • • Integrated power cable retainer
  • • 600 pound weight capacity
  • • Quick CPR deflation within 20 seconds

Moxi Bariatric Select Air

  • • Hand-held control
  • • Pressure sensor technology
  • • Air escapes from tiny air openings, distributed equally across the top mattress surface, and circulates under a vapor-permeable cover, to wick moisture away from the patient.
  • • Firm mattress mode with timer to facilitate nursing care during dressing change and patient repositioning.
  • • Upright patient mode gives added support when higher elevation is required, with no loss of clinical effectiveness.
  • • Select Air controls moisture with wicking action.
  • • Air gently blows underneath a vapor-permeable cover, wicking moisture away and keeping the skin at a healthy moisture level.
  • • Waterproof, vapor permeable, flame resistant
  • • 680 pound weight capacity

to assess your needs, provide a free price quote or request more information